界面砂浆及界面剂涂刷：
a、用刷子或滚筒将自流平界面剂均匀地涂刷到准备好的界面砂浆表面，根据地面情况，涂刷两遍或两遍以上，**遍与水按体积比1:3混合。**遍喷洒浓度稍低些加强渗透能力待表干后喷洒浓度稍高的界面剂，喷洒的量不宜过多，表面稍微结层膜即可，把多余的积累的界面剂扫开，不能有多余的积累的界面剂。第二遍或第二遍以上与水按体积比1:2混合。
b、把界面砂浆和专用乳液按照5:1的比例混合，用抹灰抹刀批刮在喷涂过界面剂的基层，厚度2mm左右，同时把抗裂玻璃纤维网压入界面砂浆里边，收平。2-4小时后，界面砂浆已经干燥后，再用刷子或滚筒将自流平界面剂均匀地涂刷到准备好的界面砂浆表面，根据地面情况，涂刷一遍或两遍。
Mortar and interface agent coating:
A, with the brush or roller besmear equably self-leveling interface treatment agent to prepare a good interface mortar surface, according to the situation on the ground, besmear brushs twice or more than twice, the first time is mixed with water by volume ratio 1:3. First pass spray concentration slightly lower after being table dry spray penetration ability slightly higher concentration of interfacial agent, the amount of spraying shoulds not be too much, a little knot membrane surface, drive the accumulation of excess of interface agent, cannot have the accumulation of excess of interface agent. The second time or the second times according to the volume ratio 1:2 mixed with water.
B, the interface mortar and dedicated emulsion mix proportion to the amount of 5 to 1, with plaster spatula batch after spraying at the grass-roots level of interface agent, the thickness of 2 mm or so, at the same time, the crack glass fibres into interface mortar, closed flat. 2-4 hours later, after interface mortar is dry, then with the brush or roller besmear equably self-leveling interface treatment agent to prepare a good interface mortar surface, according to the situation on the ground, besmear brushs once or twice.
北京金盾地坪工程有限公司是一家专业从事无机磨石制作、仝加磨地坪施工、北京水磨石地坪、北京水洗石、北京环氧磨石服务热线：13811123901
